lifts for sale mi

Kit includes;

Lift Frame

Bunks

12V DC Lift Tech Motor

1 Marine Battery

20W Solar Panel Kit

28' Canopy Frame, (Your Choice of Color)

Lakeshore Products Hoist;

Capacity - 3,000 lbs

Lift height - 54"

Inside beam width: 120"

*** Photos may illustrate options not priced in combo kit ***

STAINLESS STEEL CABLES

Resist rust and corrosion better than galvanized steel.

IMPROVED WINCH

DESIGN

A larger drum makes the cable last longer.

IMPROVED WHEEL DESIGN

41" diameter wheel extends further

out over the dock, making it easier

to operate and reducing interference with the canopy

REINFORCED

VINYL WRAPPED

ALUMINUM BUNKS

Gently support your boat without damaging the

surface. Fully adjustable to fit your boat. Will not rot or warp, lighter than wood.

V CRADLE DESIGN ON 3000 AND 4000 LB LIFTS

Designed in a V style to cradle your boat and can be used in very shallow water. (The LSV20100C and the LSV50120C have a straight cradle.)

36" ADJUSTABLE LEGS WITH PIVOTING PADS

Because lake bottoms

are almost never perfectly flat. The legs may be removed for shallow water applications.

REINFORCED MAINFRAME SPREADERS

Resists the damage caused by yearly installation and removal, and strong enough to sit directly on the bottom

in shallow water.

SOLID BRASS PULLEYS

Solid brass is expensive and worth it. Brass is the best combination of high strength and low cable abrasion. It will not corrode and lasts a lifetime. LSV20100C features brass on the front cradle only.

Lakeshore Products Cantilever Hoist

Included:

Lift Frame

Manual Winch

HEAVY DUTY WINCH

Heavy duty winch has greater strength and dependability than lightweight “trailer” type winches that are used by other manufacturers. New design allows winch to be positioned on either side of the lift.

DOCKSIDE WHEEL DESIGN

Innovative design extends out 29" from the lift to allow easy cranking from the dock. The 32" diameter wheel is powder coated for a durable finish.

NON MARKING ROLLERS

White polyester rollers gently guide your boat onto the lift without damage or marks.

REDESIGNED FOR TRITOONS

Improved H unit design with widened V and lowered cross support to accept tritoons in shallow water.

BUILT-IN LEG BRACKET

With each 4' extension kit.

Included:

Lift Frame

Bunks, Pontoon

12 Volt D/C Lift Tech Motor

Deep Cycle Marine Battery

Solar Panel Kit

28' Canopy Kit (Choice of color)

Lakeshore Products Hoist;

Capacity - 5,000 lbs

Lift height - 54"

Inside beam width: 120"

*** Photos may include/illustrate options not included in pricing of combo kit ***

STAINLESS STEEL CABLES

Resist rust and corrosion better than galvanized steel.

IMPROVED WINCH

DESIGN

A larger drum makes the cable last longer.

IMPROVED WHEEL DESIGN

41" diameter wheel extends further

out over the dock, making it easier

to operate and reducing interference with the canopy

REINFORCED

VINYL WRAPPED

ALUMINUM BUNKS

Gently support your boat without damaging the

surface. Fully adjustable to fit your boat. Will not rot or warp, lighter than wood.

V CRADLE DESIGN ON 3000 AND 4000 LB LIFTS

Designed in a V style to cradle your boat and can be used in very shallow water. (The LSV20100C and the LSV50120C have a straight cradle.)

36" ADJUSTABLE LEGS WITH PIVOTING PADS

Because lake bottoms

are almost never perfectly flat. The legs may be removed for shallow water applications.

REINFORCED MAINFRAME SPREADERS

Resists the damage caused by yearly installation and removal, and strong enough to sit directly on the bottom

in shallow water.

SOLID BRASS PULLEYS

Solid brass is expensive and worth it. Brass is the best combination of high strength and low cable abrasion. It will not corrode and lasts a lifetime. LSV20100C features brass on the front cradle only.

Included:

Lift Frame

Bunks Pontoon

12V DC Lift Tech Motor

Deep Cycle Marine Battery

Solar Panel Kit

28' Canopy Kit (your choice of color)

Lakeshore Products Hoist;

Capacity - 4,000 lbs

Lift height - 54"

Inside beam width: 120"

*** Photos may include/illustrate options not included in pricing of combo kit ***

STAINLESS STEEL CABLES

Resist rust and corrosion better than galvanized steel.

IMPROVED WINCH

DESIGN

A larger drum makes the cable last longer.

IMPROVED WHEEL DESIGN

41" diameter wheel extends further

out over the dock, making it easier

to operate and reducing interference with the canopy

REINFORCED

VINYL WRAPPED

ALUMINUM BUNKS

Gently support your boat without damaging the

surface. Fully adjustable to fit your boat. Will not rot or warp, lighter than wood.

V CRADLE DESIGN ON 3000 AND 4000 LB LIFTS

Designed in a V style to cradle your boat and can be used in very shallow water. (The LSV20100C and the LSV50120C have a straight cradle.)

36" ADJUSTABLE LEGS WITH PIVOTING PADS

Because lake bottoms

are almost never perfectly flat. The legs may be removed for shallow water applications.

REINFORCED MAINFRAME SPREADERS

Resists the damage caused by yearly installation and removal, and strong enough to sit directly on the bottom

in shallow water.

SOLID BRASS PULLEYS

Solid brass is expensive and worth it. Brass is the best combination of high strength and low cable abrasion. It will not corrode and lasts a lifetime. LSV20100C features brass on the front cradle only.

Included:

Lift Fame

Bunks Pontoon

Motor 120V A/C Lift Tech

28' Canopy Kit, (your choice of color)

Lakeshore Products Hoist;

Capacity - 4,000 lbs

Lift height - 54"

Inside beam width: 120"

*** Photos may include/illustrate options not included in pricing of combo kit ***

STAINLESS STEEL CABLES

Resist rust and corrosion better than galvanized steel.

IMPROVED WINCH

DESIGN

A larger drum makes the cable last longer.

IMPROVED WHEEL DESIGN

41" diameter wheel extends further

out over the dock, making it easier

to operate and reducing interference with the canopy

REINFORCED

VINYL WRAPPED

ALUMINUM BUNKS

Gently support your boat without damaging the

surface. Fully adjustable to fit your boat. Will not rot or warp, lighter than wood.

V CRADLE DESIGN ON 3000 AND 4000 LB LIFTS

Designed in a V style to cradle your boat and can be used in very shallow water. (The LSV20100C and the LSV50120C have a straight cradle.)

36" ADJUSTABLE LEGS WITH PIVOTING PADS

Because lake bottoms

are almost never perfectly flat. The legs may be removed for shallow water applications.

REINFORCED MAINFRAME SPREADERS

Resists the damage caused by yearly installation and removal, and strong enough to sit directly on the bottom

in shallow water.

SOLID BRASS PULLEYS

Solid brass is expensive and worth it. Brass is the best combination of high strength and low cable abrasion. It will not corrode and lasts a lifetime. LSV20100C features brass on the front cradle only.

Lakeshore Products Cantilever Hoist - 20' Frame + 8' Extension Frame

Includes;

Lift Frame - 20'

8' Extension Frame

Manual Winch

HEAVY DUTY WINCH

Heavy duty winch has greater strength and dependability than lightweight “trailer” type winches that are used by other manufacturers. New design allows winch to be positioned on either side of the lift.

DOCKSIDE WHEEL DESIGN

Innovative design extends out 29" from the lift to allow easy cranking from the dock. The 32" diameter wheel is powder coated for a durable finish.

NON MARKING ROLLERS

White polyester rollers gently guide your boat onto the lift without damage or marks.

REDESIGNED FOR TRITOONS

Improved H unit design with widened V and lowered cross support to accept tritoons in shallow water.

BUILT-IN LEG BRACKET

With each 4' extension kit.

Included:

Lift Frame

Bunks, Pontoon

Motor A/C Lift Tech

28' Canopy Kit, (Your choice of color)

Lakeshore Products Hoist;

Capacity - 3,000 lbs.

Lift height - 54"

Inside beam width: 120"

*** Photos may include/illustrate options not included in pricing of combo kit ***

STAINLESS STEEL CABLES

Resist rust and corrosion better than galvanized steel.

IMPROVED WINCH

DESIGN

A larger drum makes the cable last longer.

IMPROVED WHEEL DESIGN

41" diameter wheel extends further

out over the dock, making it easier

to operate and reducing interference with the canopy

REINFORCED

VINYL WRAPPED

ALUMINUM BUNKS

Gently support your boat without damaging the

surface. Fully adjustable to fit your boat. Will not rot or warp, lighter than wood.

V CRADLE DESIGN ON 3000 AND 4000 LB LIFTS

Designed in a V style to cradle your boat and can be used in very shallow water. (The LSV20100C and the LSV50120C have a straight cradle.)

36" ADJUSTABLE LEGS WITH PIVOTING PADS

Because lake bottoms

are almost never perfectly flat. The legs may be removed for shallow water applications.

REINFORCED MAINFRAME SPREADERS

Resists the damage caused by yearly installation and removal, and strong enough to sit directly on the bottom

in shallow water.

SOLID BRASS PULLEYS

Solid brass is expensive and worth it. Brass is the best combination of high strength and low cable abrasion. It will not corrode and lasts a lifetime. LSV20100C features brass on the front cradle only.

Included:

Lift Frame

Manual Winch

Bunks, Pontoon

28' Canopy Kit, (Your Choice of Color)

Lakeshore Products Hoist;

Capacity - 3,000 lbs

Lift height - 54"

Inside beam width: 120"

*** Photos may include/illustrate options not included in pricing of combo kit ***

STAINLESS STEEL CABLES

Resist rust and corrosion better than galvanized steel.

IMPROVED WINCH

DESIGN

A larger drum makes the cable last longer.

IMPROVED WHEEL DESIGN

41" diameter wheel extends further

out over the dock, making it easier

to operate and reducing interference with the canopy

REINFORCED

VINYL WRAPPED

ALUMINUM BUNKS

Gently support your boat without damaging the

surface. Fully adjustable to fit your boat. Will not rot or warp, lighter than wood.

V CRADLE DESIGN ON 3000 AND 4000 LB LIFTS

Designed in a V style to cradle your boat and can be used in very shallow water. (The LSV20100C and the LSV50120C have a straight cradle.)

36" ADJUSTABLE LEGS WITH PIVOTING PADS

Because lake bottoms

are almost never perfectly flat. The legs may be removed for shallow water applications.

REINFORCED MAINFRAME SPREADERS

Resists the damage caused by yearly installation and removal, and strong enough to sit directly on the bottom

in shallow water.

SOLID BRASS PULLEYS

Solid brass is expensive and worth it. Brass is the best combination of high strength and low cable abrasion. It will not corrode and lasts a lifetime. LSV20100C features brass on the front cradle only.

Kit includes:

Lift Frame

Bunks, Pontoon

120V A/C Lift Tech Motor

28' Canopy Kit, (Your Choice of Color)

*** Photos may include/illustrate options not included in pricing of combo kit ***

Lakeshore Products Hoist;

Capacity - 5,000 lbs

Lift height - 54"

Inside beam width: 120"

STAINLESS STEEL CABLES

Resist rust and corrosion better than galvanized steel.

IMPROVED WINCH

DESIGN

A larger drum makes the cable last longer.

IMPROVED WHEEL DESIGN

41" diameter wheel extends further

out over the dock, making it easier

to operate and reducing interference with the canopy

REINFORCED

VINYL WRAPPED

ALUMINUM BUNKS

Gently support your boat without damaging the

surface. Fully adjustable to fit your boat. Will not rot or warp, lighter than wood.

V CRADLE DESIGN ON 3000 AND 4000 LB LIFTS

Designed in a V style to cradle your boat and can be used in very shallow water. (The LSV20100C and the LSV50120C have a straight cradle.)

36" ADJUSTABLE LEGS WITH PIVOTING PADS

Because lake bottoms

are almost never perfectly flat. The legs may be removed for shallow water applications.

REINFORCED MAINFRAME SPREADERS

Resists the damage caused by yearly installation and removal, and strong enough to sit directly on the bottom

in shallow water.

SOLID BRASS PULLEYS

Solid brass is expensive and worth it. Brass is the best combination of high strength and low cable abrasion. It will not corrode and lasts a lifetime. LSV20100C features brass on the front cradle only.

Included:

Lift Frame

Manual Winch

Bunks Pontoon

28' Canopy Kit, (your choice of color)

Lakeshore Products Hoist;

Capacity - 5,000 lbs

Lift height - 54"

Inside beam width: 120"

*** Photos may include/illustrate options not included in pricing of combo kit ***

STAINLESS STEEL CABLES

Resist rust and corrosion better than galvanized steel.

IMPROVED WINCH

DESIGN

A larger drum makes the cable last longer.

IMPROVED WHEEL DESIGN

41" diameter wheel extends further

out over the dock, making it easier

to operate and reducing interference with the canopy

REINFORCED

VINYL WRAPPED

ALUMINUM BUNKS

Gently support your boat without damaging the

surface. Fully adjustable to fit your boat. Will not rot or warp, lighter than wood.

V CRADLE DESIGN ON 3000 AND 4000 LB LIFTS

Designed in a V style to cradle your boat and can be used in very shallow water. (The LSV20100C and the LSV50120C have a straight cradle.)

36" ADJUSTABLE LEGS WITH PIVOTING PADS

Because lake bottoms

are almost never perfectly flat. The legs may be removed for shallow water applications.

REINFORCED MAINFRAME SPREADERS

Resists the damage caused by yearly installation and removal, and strong enough to sit directly on the bottom

in shallow water.

SOLID BRASS PULLEYS

Solid brass is expensive and worth it. Brass is the best combination of high strength and low cable abrasion. It will not corrode and lasts a lifetime. LSV20100C features brass on the front cradle only.

45OOLBS Capacity

120" wide 

Winch/wheel lift with pontoon bunks

30' Canopy Kit 

*guides, tritoon bunks, and motor stop not included in price*

6000LBS Capacity 

120" Wide 

Winch/Wheel lift with pontoon bunk kit 

30' canopy kit 

*Tritoon bunks,  guides, and motor stop not included*